TheCAShop Electric Winch 12 Volt 8000 lbs Wired Remote Recovery

This is an 12V 5.5HP DC Powered Electric Winch which features 8,000 lbs capacity and comes with Efficient Three-stage Planetary Gear Train, Automatic Braking Action, Handheld Corded Remote Switch, Free Spooling Clutch, Power IN and OUT, and a 4-Way Roller Fairlead etc. Powerful HorsePower, Extra Fast Speed, and Compact Design make this winch a must-have for recovery applications.

Features:

• 8,000LBS (single line rated pull) Electric Winch
• Efficient three-stage planetary gear train helps to offer powerful horsepower
• 4-way roller fairlead to guide the rope onto the drum evenly
• Free spooling clutch allows the wire rope to be pulled out without using electric power
• Power IN and OUT through a remote switch with 12ft lead
• Convenient and safety design with button for switch from wired to wireless control
• Automatic braking in the drum will lock the wire rope and stop pulling when you release button on the switch
• Extra protective casings for connectors, insuring safety and low wear-out
• Custom gaskets seal up critical inner components from water and debris infiltration

Specification:

• Single Line Rated Pull: 8000 lbs (3629 kg)
• Motor: 5.5hp/4.0kw (12V), Series Wound
• Gear Reduction Ratio: 148.2:1
• Gear train: 3 Stage Planetary
• Fairlead: 4-Way Roller Fairlead
• Clutch: Sliding Ring Gear
• Braking Action: Two way braking action in the drum
• Remote Control: Wired
• Control: remote switch with 12ft (370 cm) lead
• Drum Size (Dia. x L): 2 1/2″ x 8 13/16″ (64 x 224 mm)
• Cable Size (Dia. x L): 5/16″ x 92′ (8.1mm x 28m)
• Battery Recommended: 650CCA minimum for winching
• Battery Lead: 2 gauge, 72″ (183 cm)
• Overall Dimension (LxWxH): 21 1/8″ x 6 5/16″ x 8 9/16″ (537 x 160 x 218 mm)
• Mounting Bolt Pattern (LxW): 10″ x 4 1/2″ (254 x 114.3 mm)
• Net Weight: 73.7 lbs (33.5 kg)

Package Includes:

• 1x 8000lbs Winch
• 1x Solenoid Box Assembly
• 1x Roller Fairlead
• 1x Remote Switch with 12ft Lead
• 1x Hook
• 1x Safety Pull Strap
• 1x Battery Lead
• 1x Set of Fixing Accessories
• 1x Manual

• Mounting plate is not included. You need a suitable winch mounting plate to hold your winch and fairlead before installing the winch onto your vehicle. (The type of mounting plate should refer to if your vehicle equipped with a fender guard or not.)

Notice:

1) Do not use winch as a hoist, do not use for transportation of people.
2) Don’t operate and spool under full load over one minute continuously.
3) While motor is over heating, please stop for a while to cool down.

Line speed and motor current (first layer):

Line pull and Cable capacity: